Filing cabinets wood – Archiving cabinets are potential desktop components. Because they have a flat top, pull-out drawers and a built-in organizational system. You can easily convert your desktop-height file cabinet to desktop using the cabinet as one of the legs. Another cabinet of the same height and a piece of timber to the top will complete the project. The result is a robust desk with a modern and utilitarian look. Instructions: Starting with purchase another file cabinet that corresponds to the first one or is at least at the same height.
Place the two archive cabinets instead where you want the desktop to go. And as far apart as you want desktops long. Freezers will work as supports for the desktop. Next, measure distance from the outer edge of the first filing cabinets wood to the outer edge of the other cabinet. This is the length of the plywood you need. Measure the width of the filing cabinet to get the width of the plywood. Mark measurements of length and width of the desktop on a piece of 3/4 inch plywood slabs. The plywood can be any kind of wood you prefer.
12 Photos Gallery of: Make Filing Cabinets Wood for the Pull-Out Drawer Desk
Cut the sheet for measurements with a circular saw. Some home improvement stores will make the cuts for you if you buy plywood there. Remove the top drawer in each cabinet. Drill holes through the top of the cupboards with an electric drill. Place a hole in each of the four corners and in the middle. Last, lay plywood on top of the two cabinets. Use the exercise to screw a 3/4 inch screw into each of the holes in the filing cabinets wood and through the plywood. You will have to screw them from the bottom into the top drawer space. And your new filing cabinets wood was ready to use.