Replacing A File Cabinet Locks

Dec 17th

Replacing A File Cabinet Locks – Filing cabinets are furniture that is used to store and also organize the documents in your homes and business. Some of these cabinets are equipped with the locks that can help you to keep documents secure, and also include a plunger-type locking mechanisms. Quite often, you have to replace the locks in order to prevent unauthorized access in the office setting. Luckily, it is easy for you to replace your filling cabinet lock. Here are some great tips for you

Wonderful File Cabinet Locks
Wonderful File Cabinet Locks

The first step to replacing a file cabinet locks is that you should open your cabinet drawer that is close to the lock. If you do not have a key, and your cabinet is locked, do not worry because you have several options. Some of these locks are gravity-based, so you can open the drawer by turning the cabinet upside down. If it does not work, you can drive a regular drill bit straight through the cylinder of the lock. It should be done carefully in order to avoid damage to your cabinet itself. Once you have drilled the lock, the drawer should pull open easily. Then you have to grasp the C-shaped clip at the back of the lock with the pliers. One if you have removed the clip, you have to be able to slide the lock out of the opening.

12 Photos Gallery of: Replacing A File Cabinet Locks

Image of: Wonderful File Cabinet Locks
Image of: Top File Cabinet Locks
Image of: Simple File Cabinet Locks
Image of: Pictures File Cabinet Locks
Image of: Photos File Cabinet Locks
Image of: Images File Cabinet Locks
Image of: File Cabinet Locks
Image of: File Cabinet Locks Ideas
Image of: File Cabinet Locks Designs
Image of: Drawer File Cabinet Locks
Image of: Best File Cabinet Locks
Image of: Awesome File Cabinet Locks
 

Then you need to install your file cabinet locks. The specific instruction may vary, but the common procedures are as follows. Place your key in the lock and unsure that it is in the unlocked position. Insert a new lock into the opening and be sure that the key way is upright and the cam is pointing down. After that you have to hold the C-clip flush against the inside wall of your cabinet. Insert the two prongs on the clip into the hole pre-drilling on the key lock to hold it. And the last thing that should be done is you have to make sure the key bolt on the back of the locking mechanism is aligned with the key in your cabinet. You can use your key in order to test the lock before closing the drawer.