Bench deck box – Starting with cut plywood in five pieces, each 16 inches long. Two pieces should be equal to the width of the board. Two more pieces must measure 16 inches by 14.5 inches and the final piece must measure 16 inches of the width you choose. Then, set the final piece of plywood aside for the moment. Make a box shape with the other four pieces. The two 16 of 14.5 inch pieces should be clamped between the two longer boards at the end. Run it a line of glue along two side edges of some smaller pieces of plywood. Press against the larger pieces to form the box.
Assemble pieces by tightening into three tiers the screws on each corner. Place the screws about 5 inches apart, with screws on top and bottom 1 inch from the edge. After that, run it a line of glue on four side edges of the remaining pieces of plywood on the side that will be inside the box. Place the remaining piece down on the top of the box lining up the edges. Secure in place by attaching tires screws on all four sides, spaced 5 inches apart. Next, turn the box right side up so that the plywood board is on the bottom. Cut 2 by 4 inches the board to fit inside the bench deck box. You should cut it 1.5 inches shorter than the width of the box.
12 Photos Gallery of: Build Wooden Bench Deck Box
Put 2 of 4 inch tables inside the box; flush the top edge of the back. Does the board say that the box with 2 1/4 inch tires will screw? Use a screw on each side and three on the inside of the box. And then, cut the birch plywood so that it is 18 inches long and 2 inches longer than the width of the box piece. Place the plywood over the box so that it expands 2 inches beyond the front of the box and 1 inch on each side. Add the box with the hinged birch plywood. Follow the instructions provided with hinges for proper installation. Do you want the lid to be able to open completely? Paint or stain the bench deck box and let it dry overnight.